Posted by Tom Ramsey on March 16, 2010 at 11:32:32:
In Reply to: Re: Mikton 132 info posted by Robi on March 12, 2010 at 11:08:07:
Very good! There are other intermediates available and you can mke up your own. Standards are 1/2, 1/3, 1/4. You can put a 64 on "A" and cut small numbers of teeth. 64 Idler 36 = 9 teeth.
I've never seen a 132 with a belt drive to the spindle but I will send you what I have soon.