Posted by tom on January 29, 2012 at 02:46:00:
In Reply to: super gear center destance posted by inshaajee on January 27, 2012 at 10:32:26:
the total number of teeth of the two gears must be 110 teeth
You can build two identical gears with these characteristics:
Z55 ; O.D. 229.30 mm ; module 4 ;
chordal measurement 7 teeth= 80.54 mm backlash 0 (with a little backlash 80.44 mm)
come out with two super gear pressure angle of about 21.20 degrees
regard tom