Re: MIKRON 102.03


[ Follow Ups ] [ Post Followup ] [ Meshing with Gears Discussion Forum ] [ FAQ ]

Posted by BillS on March 06, 2013 at 10:05:58:

In Reply to: Re: MIKRON 102.03 posted by BillS on February 27, 2013 at 12:05:32:

Could you tell me what the index and feed constants are for your Mikron?

Index Gear Ratio = Index Constant / Teeth

Feed Gear Ratio = Table Feed / M

where M is inch of table travel per revolution of workpiece. Feed Constant, M, is likely a decimal value (.075, .0375, for example). If the machine is metric, then M would likley be mm of table travel per revolution.

Or sometimes Feed Constant K appears as follows:

Feed Gear Ratio = K x Table Feed

where K is revolutions of workpiece per inch of table travel. K is most often expressed as an integer (6, 8, or 10 for example). However, if machine is metric, then feed is likely a decimal value.




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Meshing with Gears Discussion Forum ] [ FAQ ]