Posted by Dan McEachern on August 26, 2011 at 14:56:16:
In Reply to: Re: how to deburr worm gears posted by Raghavendra.Golasangi on August 22, 2011 at 02:39:06:
Alum bronze requires a sharp hob. If you are kicking up a really heavy burr, check your hob sharpness. Assuming your burr is on the side , you might look for an older Redin deburring machine. These were made in several sizes, but you don't say how big your parts are.
Post a Followup