Re: stub or standard gear?


[ Follow Ups ] [ Post Followup ] [ Meshing with Gears Discussion Forum ] [ FAQ ]

Posted by Michael Ignat on January 06, 2007 at 20:18:11:

In Reply to: Re: stub or standard gear? posted by kevin on January 04, 2007 at 07:14:23:

Possible version (obviously stub):

SPLINE 1 (external): W 110x2x54x8f DIN 5480
Involute, flat root side fit
2 mm module
54 teeth
110 mm nominal (basic) dia
30°PA pressure angle
xm=-0.100 mm
major dia=109.6 h11 mm
minor dia=105.4 h14 mm (if hobbed; minimum size not critical)
MOP=114.205-114.140 over 4mm dia pins

SPLINE 2 (internal): N45x2x21x9H DIN 5480
Involute, flat root side fit
2 mm module
21 teeth
45 mm nominal (basic) dia
30°PA pressure angle
xm=+0.400 mm
minor dia=41 H11 mm
major dia=45 H14 mm
MBP =37.651-37.733 between 3.5mm dia pins



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Meshing with Gears Discussion Forum ] [ FAQ ]